U4 Router | How to Set Up Your U4 System
Get Started
Locate your existing Internet service device. This will most likely be a modem or ONT.
1. Plug your new system into a power outlet.
2. Connect an Ethernet cable from a port labeled LAN on your existing internet service device to the port labeled WAN on your new system.
3. Once done, your system will begin to boot-up. This will take a few minutes.
4. When completed, the LED light on the system will be illuminated solid blue, letting you know that Internet connection has been established.
5. If your existing Internet service device has Wi-Fi built in, turn off the Wi-Fi on that device.
6. If you have a separate Internet router connected to your Internet service device, unplug and remove it.
Your set up is now complete, but if you have further questions or troubles, please do not hesitate to contact us at 604.642.6688 for Tech Support. Or send us a direct message on Facebook/Twitter!